INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 SCX30

INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 Axial SCX30

Features:

• CNC-machined aluminum servo case for added strength and durability
• Metal gear set built to handle higher steering loads
• Higher torque output than the stock servo for stronger steering performance
• Spring-loaded servo saver helps absorb impacts and protect the servo gears

Specifications:

• Part Number: N30
• Motor Type: Brushed Coreless
• Gear Type: Metal
• Case Material: Aluminum Alloy
• Feedback Type: Potentiometer
• Operating Voltage: 5–6.0V
• Control Signal: PWM
• No-load Speed (6V): 0.050 sec/60°
• No-load Current (6V): 110mA
• Stall Torque (6V): 1.3kgf·cm
• Stall Current (6V): 660mA
• Operating Angle: 180° (500–2500 μsec)
• Dimensions: 15.2×12.85×21.45mm
• Wire Length: JR 115mm / 28AWG
• Weight: 7g
• Waterproof: No

Installation Tip: SCX30 uses very small hardware. Use the correct-size driver and light pressure. Tighten only until the screw is seated and snug, then stop. If you feel resistance before it is seated, or if the screw does not thread smoothly, stop and check the alignment before continuing.

Package List:

• 1 × N30 Servo
• 1 × Servo Saver